products categories
Download
contact us
- If you have questions, please contact us, all questions will be answered
- Tel : +86-595-22515230
- Fax : +86-595-22515221
- Email : marketing@gester-instruments.com
- Email : sales@gester-instruments.com
hot products
-
Mask Synthetic Blood Penetration Tester GT-RA01
-
Mask Bacterial Filtration Efficiency (BFE) Tester GT-RA02
-
Mask & Respirator Breathing Resistance Tester GT-RA03
-
Face Mask Differential Pressure Tester GT-RA04
-
Non-power Air-purifying Particle Respiratory Protective Tester GT-RA05
-
Mask Flame Retardant Tester GT-RA06
Brand:
GESTERItem No.:
GT-S06Certificate:
ISO 9001, UKAS, CEStandard:
ISO 11540 BS 7272-1 GB/T 24110Shipping Port:
Xiamen PortLead Time:
7-30 daysPayment:
100% T/T in advance
Previous:
EN71 Part 1 Rattle Test Template Stand GT-MB60Next:
EN 71Part 1 Perimeter of Ropes and Chains Tester GT-MB23
Pen-cap Air Flow Tester GT-S06
Application: This Pen-Cap Air Flow Test Equipment mainly be used to test the safety of the caps for writing and marking instruments which are designed or clearly intended for use by children up to 14 years of age. However, Caps for writing and marking instruments which are not designed or intended for use by children, e.g. jewellery pens, expensive fountain pens, professional technical pens, are not be test by this method.
Standards: ISO 11540 BS 7272-1 GB/T 24110
|
The test cap is fully inserted into an elastomeric tube of the appropriate diameter and the air flow through the tube and the pressure drop are measured in both directions. And when tested, caps shall permit a minimum air flow of 8 l/min, measured at room temperature, with a maximum pressure drop of 1.33 Kpa.
inquiry now
We will give you a quotation within 24 hours.
Gester Instruments Co.,Ltd.
Tel:+86-595-22515230Email:marketing@gester-instruments.com
Email:sales@gester-instruments.com
Skype:sales@gester-instruments.com
20N.m Digital Cap Torque Tester GT-ST-B
GT-ST-B series Digital Cap Torque Tester is an intelligent metrologic instument, it is designed for detecting and calibrating the torque torsion of approval and closure of various caps.
50N.m Digital Torque Tester GT-ST
GT-ST Series digital torque tester is R&D for testing and measuring many kinds of torque.
EN71 Part 1 Rattle Test Template Stand GT-MB60
It’s auxiliary stand to support GT-M46 Rattle Test Template & GT-M47 Small Ball Test Template, so as to it be more convenient to do test.
ASTM Test instruments Length of Ropes and Chains Tester GT-MB22B
ASTM Test instruments Length of Ropes and Chains Tester used to measure length for the ropes, chains or wires on toys.