Medical Face Mask Synthetic Blood Penetration Resistance Tester In stock, fast delivery.

Mask Bacterial Filtration Efficiency Tester is applied to test the filtration efficiency of mask.

medical face mask differential pressure tester In stock, fast delivery.Professional after-sales team.

Particulate Filter Efficiency Tester, PFE Tester In stock, fast delivery.

Protective Clothing and Masks Leakage Tester Engineers service on site to install and commissioning overseas.

GESTER Mask Flame Retardant Tester we can provide on-site machine installation and training service.

Non-power Air-purifying Particle Respiratory Protective Tester 20 years R & D sales experience.

Mask and Respirator Breathing Resistance Testerrcan be used to determine the inspiratory and expiratory resistance of masks under specified conditions.

Particle filtration efficiency (pfe) test is suitable for rapid, accurate and stable detection of the filtration efficiency of various medical and daily protective masks, respirators, etc.

This mask tester is to test the particulate leakage rate (TIL & IL) of mask, full face mask, breathing apparatus and gas mask.

Protective Mask Leakage Tester GT-RA08B-2 Product Introduction Application: This Mask Testing Machine is to test the particulate leakage rate (TIL & IL) of mask, full face mask, breathing apparatus and gas mask.  Standards: BS EN149 8.5, TAJ 1001 PM, GB 2626, GB 2890   Feature Test chamber is made of glass Mask Leakage Tester Using the stainless steel for frame Mask Leakage Tester Using TSI photometer and flame photometer Protective Mask Leakage Tester Key Specification Model GT-RA08B-2 Test aerosol NaCl, Oil (Corn oil and paraffin oil) Aerosol Concentration Detector Flame photometer (For NaCl aerosol test) 2sets TSI Laser photometer (For oil aerosol test) 2sets Oil aerosol generator Particle concentration 20mg/m³～30mg/m³ Aerodynamics size distribution of particle Approx 0.02～2um Mass median diameter Aapprox 0.3um NaCl aerosol generator Particle concentration 4mg/m³～12mg/m³ Aerodynamics size distribution of particle Approx 0.02～2um Mass median diameter Aapprox 0.6um Aerosol occurrence amount ≥ 100L/min Sampling pump adjust range 0.50～4L/min Particle sampling flow 1～2L/min Aerosol concentration detector dynamic range 0.001～200mg/m³, accuracy 1％, response time ≤500ms Power requirement 1phase 220V 50Hz, 2KW Air requirement 0.5MPa, 120L/min Dimension Outer size of testing room: 2000mm×1600mm×2600mm(L×W×H) Control cabinet: 880mm×520mm×1400mm (L×W×H) Accessories: Standard accessories 2sets Flame photometer 2sets TSI Laser photometer 1set NaCl aerosol generator 1set Oil aerosol generator

Mask Bacterial Filtration Efficiency (BFE) Detector,are mainly used for testing the bacterial filtration efficiency performance of masks applicable to metrological verification departments, scientific research institutes, medical mask production units and their related testing departments.