Baby Stroller Testing Machine Rotating Test GT-MH22 Product Introduction Application: The tester can attach the vehicle by its wheels or axles to the rigid platform which can be orientated in an axis parallel to the ground. Slowly rotate the vehicle with the test mass through a specified angle to the horizontal both in a clockwise and anticlockwise direction such that the attachment devices alone transmit the test load to the chassis or seat unit , and maintain this position for an specified time in each direction. Satndards: EN 1888-2012 Section8.1.3.2.1 ,8.10.2, GB 14748-2006 Section 5.15 Feature 1.The test platform with wheel axle fixing device. 2.The test platform can rotate clockwise and counter clockwise. 3.Automatic judgment of specimen damage, automatic stop working. 4.Programmable control rotation angle, test frequency, cycle test, spacing interval 5.Can autosave when interruption of power supply, can choose to stop or continue to work 6.High precision angle sensor, can display table angle in real time. Key Specifications   Rotating speed 4±0.5rpm Control mode PLC Display mode 7 inch screen touch screen display Date display Angle, frequency Power supply AC 220V, 50Hz

The machine is mainly used to test the dynamic durability of the baby trolley on irregular surfaces.

This Stroller Handle Tester is suitable for baby trolley simulation over the barrier when the lifting and under the action of the durability test, the test method is to place the baby model in the car, raised when the car back to the ground 120±10mm, under pressure When the front wheel to the ground 120±10mm, 15±2 times per minute, and continue to test the number of times after the test, the visual car with or without damage.

This machine is to test the dynamic resistance of reversible and/or adjustable child vehicle handles.