Toy Handlebar Resistance To Separation Tester is used to test the anti-separation performance of toy handlebars. Standards: ISO 8124-1 5.30.

This Brake Test Machine is mainly used to test the motor brake performance of electric ride-on toys .

For this Brake Performance Tester, the tilt angle of the ramp is adjustable. The angle adjustment range is 0 ~ 45degree. Can be used to assist test the locking device of collapsible toys, the stability of toys, the brake performance of ride-on toys, etc., need to used with specified weight.

Children Products Testing Equipment | Toys Testing Equipment

Ball Impact Tester is used to test the impact resistance of all rigid toys that cover the face, meets standards: ASTM F 963, ISO 8124-1, GB6675-2.

Electric Pencil Hardness Tester GT-H100 Product Introduction Application: The hardness pencil scratch the surface of the coating film to test the surface hardness of the coating film layer, hardness pencil fixed at an angle of 45º, so that the front end of the pencil center and the surface of the coating film layer in contact with the appropriate load, according to a certain speed (JIS standard 0.5mm / s) to move the test platform so that the surface of the coating film layer moving through the pencil center, the coating film layer will not cause damage (scratch) the softest pencil grade can be considered as the coating film Layer hardness. Principle The hardness pencil scratch the surface of the coating film to test the surface hardness of the coating film layer, hardness pencil fixed at an angle of 45º, so that the front end of the pencil center and the surface of the coating film layer in contact with the appropriate load, according to a certain speed (JIS standard 0.5mm / s) to move the test platform so that the surface of the coating film layer moving through the pencil center, the coating film layer will not cause damage (scratch) the softest pencil grade can be considered as the coating film Layer hardness. Key Specifications Model GT-H100 Testing Angle 45 degrees Load Adjustable, 500g, 250g Movement Speed 5mm/sec, adjustable Stroke Space 40mm Table Approx. 12x17cm, can fix the sample Power Supply 220V / 50Hz Accessories Standard Accessories 13pcs Standard Pencils Standard Accessories 1Set Weights roducVideo 

textile testing instruments manufacturers

GT-ST-B series Digital Cap Torque Tester is an intelligent metrologic instument, it is designed for detecting and calibrating the torque torsion of approval and closure of various caps.

The Push Pull Test Stand is an assistant tool for push-pull test of toys. Applied with Push Pull Gauge, is specialized in tension/Compression, Insertion/withdraw and fracture test in every trade and scientific research organization. With gear drive and manual operation, adjustable test stand can be moved up and down to set orientation. Simpleness, stability, expeditiousness and appreciating batch test.

The TTF tensile tester is used for providing large and stable tensile during the tension test. in tensile. It is mostly used for the toys’ destructive tension test.

Hook Test is an auxiliary tool to measure perimeter for Loops and Cords, so as to determine whether length of ropes complies with safety requirements.

Wheel tension clamp is the assistant tool used for toys tension test. Mainly used for toy car wheels tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.