Battery Drop Tester GT-I02 Product Introduction Application: This drop tester is suitable for free fall testing of small consumer electronic products and components such as mobile phones (cell phones), mobile phone lithium batteries, walkie-talkies, electronic dictionaries, building intercom phones, CD/MD/MP3 players, etc. Standards: GB 31241-2022, UL 1642, IEC62133-2012, GB/T36276-2020 Main Features and Functions This battery pack drop tester adopts a pneumatic structure. The test specimen is placed in a dedicated fixture (with adjustable stroke) and clamped securely. Pressing the drop button releases the cylinder, and the test piece will undergo a free fall test. Battery drop tester Key Specifications Model GT-I02 Drop height 300~1500mm (adjustable) Display Accuracy 1mm Height error ±5mm Display Mode PID Maximum specimen weight 10kg±100g Specimen Dimensions ( L×W ) 220×150 mm Drop test medium Steel plate Test Drop Point Free fall Drop method Pneumatic drop Lifting Method Electric lifting Operating Air Pressure <2 MPa (User supply air source) Machine dimensions ( W×D×H ) 650×560×1700mm Height Setting Encoder-displayed height, intelligent control (350–1500 digitally adjustable, very convenient for users) Power supply AC 220V±10%, 50HZ Power 300W Weight Approx. 120 kg
Large Packaging Drop Testing Equipment GT-LC09 Product Introduction Large Packaging Drop Tester with dual motor control and two beams, labeled as "A" and "B." This advanced testing device offers comprehensive evaluation of package impact strength, including surface, angle, and edge assessments. Notably, it has overcome the challenges of fixed-angle drop testing found in traditional methods. This Drop Tester adding three protective functions to ensure operator safety. The landing gear operates only when all three safety features are activated, effectively minimizing the risks of accidents and safeguarding personnel. Whether you represent a large corporation or a small-to-medium enterprise, our Large Packaging Drop Testing Equipment meets the strict demands for packaging quality. By saving time and costs, it enhances product reliability and customer satisfaction. Key Specifications Model GT-LC09 Max.weight of sample 800kg Control mode PLC+Touch screen Motor 0.75 variable frequency motor + frequency changer (2groups, for adjusting height of "A" and "B" beams separately.) Moving Range 0~1200mm (adjustable) Air Cylinder Protective cylinder(4pcs) + Protective and power cylinder(4pcs) Accelerating structure 4 groups (The speed of landing gear must be higher than drop speed of sample) Anti-friction Bearing NSK Weight 3000kg Dimension 2800×2500×2500mm(L×W×H) Standard ISTA
The EN Drop Tester is to determine the toys fall on the floor through a certain height, fall in a certain number, then check whether the hazardous sharp points, hazardous sharp edges, hazardous small parts and hazardous driving mechanisms have become accessible.
ASTM Drop Tester is to determine the toys fall on the floor through a certain height, fall in a certain number, then check whether the hazardous sharp points, hazardous sharp edges, hazardous small parts and hazardousdriving mechanisms have become accessible.
English 
