Filter oscillation test chamber In stock, fast delivery.

This Impact Testing Machine is used to detect the impact resistance performance of glasses.

ISO 4855 high-speed impact testing machine

The GESTER GT-KB42 Footwear Electric Shock Resistant Tester is a high-precision PPE testing instrument engineered to determine the dielectric properties, leakage current, and voltage withstand capability of electrical insulation safety shoes. Built for specialized safety footwear laboratories, it complies strictly with global PPE protective standards including ASTM F2412, ISO 20345, ANSI-Z41, CSA-Z195, and AS/NZS 2210.2. Featuring an automated high-voltage adjustment system (up to 30KV AC), the machine accurately captures transient insulation breakdown thresholds under specific load frequencies. It serves as an essential compliance tool for protective footwear manufacturers and third-party safety inspection labs to guarantee line-worker electrical safety.

Fabric Testing Machine

Moisture Regain Oven

Altitude Simulation Test Chamber GT-I18 Product Introduction Application: This test case is designed for UL, EN, IEC and other standard testing requirements. It can reach the low-pressure storage state of the sample in a short period of time, automatically control the test cycle, monitor the pressure changes inside the box throughout the process, and achieve automatic termination of the test. Simulate the storage of batteries and battery packs for 6 hours under conditions of pressure equal to or lower than 11.6kPa and ambient temperature of (20 ± 5) ℃. The batteries are considered qualified if they do not explode or ignite. Standards: GB/T 31485, GB/T 31241, UN38.3, IEC62133, UL 1642 Using Environment Requirement Environmental temperature: 0-50 ℃. Relative humidity: 45-85% RH. Atmospheric pressure: 86-106KPa. No direct sunlight or direct radiation from other heat sources. There is no strong vibration around. High-Altitude Simulation Chamber Key Specifications Model GT-I18 Inner box material SUS304 stainless steel plate, thickness 5.0mm Pressure range 5～100KPa Pressure Accuracy 0.1KPa Inner box dimensions 800x800x800mm Viewing windor The size is 300x350mm with two layers of tempered glass, and the transparent window is equipped with stainless steel mesh. Control mode Touch screen control Vacuum Time Free setting within 0-99H99 Pressure fluctuation ≤5%

Thickness tester for films, composite films, metal foils, and rigid sheets.