Snap Tester, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile pull testing of small samples. Application Snap Tester (Button Snap Pull Tester), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available). Our snap tester consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester which allows fine control with convenient operation. The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the hand wheel, The operator can apply a specific force and the holding force or the breaking strength can be recorded. The capability of the snap tester can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others. Standards 16 CFR 1500.51-53, ASTM PS79-96, D4846 Included Accessories Standard accessories 1pc IMADA Force Gauge FB-30K 1pc GT-MC01 Upper Universal Grip 1pc GT-MC02 Upper Stud Grip 1pc GT-MC03 Lower Fabric Clamp & Level Arm Locking 1pc GT-MC04 Lower Grasp Button Accessory Kit 1pc GT-MC05 Calibration Weight 15LB 1pc GT-M37 Three Pronged Grip 1pc GT-M43 Upper Long Nose Vise Grip Optional accessories Optional GT-M36 Two Pronged Clamp Optional GT-M39 Flat Clamp Optional GT-M49 Short - Mouth Clamp Optional GT-M50 Seam Clamp Optional GT-M53 Wide - Mouth Clamp Optional GT-MC06 Multifunction Vise Clamp Optional GT-MC07 ASTM Zipper Test Kit Optional GT-MC09 Clamps for ASTM D4846 Leave an inquiry for the instruments, methods or any information. We usually respond within 12 hours, or faster.

In the child's growth , toys just like their intimate partner. Parents are also happy to by all kinds of toys for their kids as it  not only can bring child happiness but also develop their intelligence. With the growth of toys demand, toy safety has been the attention of all parents, it is also the important point we pay attention to. Children's toys and the metal edges of bicycles or other sharp parts may present or produce the risk of cutting the child, so there is a need for an improved testing tool for determining the presence of sharp edges harmful to human health and safety.Therefore, sharp edge test method is an important method in the detection of toys and children's products. What is the scope of the sharp edge tester? Glass toys or parts, toys on the edge of the collision, the toy drive device shell, cover all the hard material on the face (such as goggles, space helmet or welding mask), can bear children's weight toys (such as toy cars , Skates, etc.) Sharp Edge Tester Instrument features: 1. Metal case, to ensure the durability of the instrument. 2. Hand can press, foot to make the operation more convenient. 3. Special value of the photoelectric sensor indication function, can accurately ensure that the test force value is accurate. Standards: EN 71-1,ASTM F963 ,16CFR 1500 ,ISO 8124-1,GB 6675-1 How to use the sharp edge tester? GESTER Instrument Co., Ltd. gave you a test, the gummed paper is wound on the axle center, the to-be-tested edge of a sample is arranged above the axle center and is contacted with the gummed paper, the handle starting switch is then turned on, the motor starts to rotate so as to enable the axle center to rotate at one circle, the to-be-tested edge of the sample leaves a mark on the gummed paper, and the gummed paper is then taken down from the axle center and is checked; if more than 1/2 inch of the length of the gummed paper is scratched, the edge is a sharp edge, and the product is not qualified.                                                                       (Sharp Edge Tester TEST)

GESTER always keep learning and promote ourself quality & ability. Gester International Co.,Ltd a company that specializes in Toys, Garments, Shoes testing equipment.To help sales in our company be professional providing good service, we provide product training 3-4 times a week. We always keep learning and promote ourself quality & ability. We work together, play together, support and encourage each other to move forward. Manual Elmendorf Tearing Tester GT-C10 Electronic Elmendorf Tearing Tester GT-C11A Digital Strength Tearing Tester GT-C11B