products categories


Download Download file and products catalogue for lab testing equipment, including including Footwear Testing Equipment and Textile Testing Equipment and Toys Testing Equipment and Furniture Testing Equipment.

contact us

  • If you have questions, please contact us, all questions will be answered
  • Tel : +86-595-22515230
  • Fax : +86-595-22515221
  • Email :

hot products

  • Three Pronged Clamp

    Three Pronged Clamp GT-M37

  •  Flammability Test

    Horizontal and Vertical Flame Chamber GT-MC35F-2

  • DIN Abrasion Tester

    DIN Abrader Rubber DIN Abrasion Tester GT-KB03

AATCC 201 Drying Rate Tester GT-D61
AATCC 201 Drying Rate Tester GT-D61
  • Brand:

  • Item No.:

  • Certificate:

    ISO 9001, UKAS, CE Certificates
  • Standard:

    AATCC 201
contact now

AATCC 201 Drying Rate Tester GT-D61

Product Introduction

Drying Rate Tester: test method determines the drying rate of a fabric, exposed to a prescribed volume of water, while in contact with a heated plated set at 37 ℃ , the skin surface temperature at which the human body starts to perspire.

This method is applicable to all types of fabrics, including knits, wovens, and non-wovens, as well as to fabrics taken from end product items.


Drying Rate Tester Principle

This method determines the drying rate of a fabric based on the evaporative rate that occurs when the fabric is placed in contact with a prescribed amount of water at the interface of a heated metal plate, held to a constant temperature.


Main Parts

1.Temperature recorder--with capabilities to take readings every 1s, date storage, and transmittal to computer date file.
2.IR thermocouple probe--temperature range of 15.0-50.0±0.1℃.
3.Fan box--production of 1.5± 0.5m/s air flow across the width of the hot plate, measured directly behind the IR thermocouple probe.
4.Metal plate--30.5×30.5±0.5cm.
5.Flexible heater--30.5×30.5±0.5cm with controller to maintain temperature of 37±1℃. Cork board for insulation--30.5×30.5±0.5cm.
6.Micro pipette, adjustable volume, 0.100-1.000±0.003mL.
7.Anemometer--hot wire-type, capable of measuring air flow 0.5-2.5±0.1m/s.
8.Magnetic, plastic or metal strip, 15.0cm long, 4.0 ± 2.0cm wide, 0.2 ± 0.1cm thick, can be used to hold the specimen in place.

Key Specifications

 Drying Rate Tester Key Specification

inquiry now

    We will give you a quotation within 24 hours.

      AATCC 201 Drying Rate Tester GT-D61

    Contact Us:

    Gester Instruments Co.,Ltd.

main Products
  • BS 5852 combustion test equipment BS5852 Flammability Tester GT-C93

    BS 5852 flammability Tester is widely used in Europe and American upholstered furniture’s flame retardant property test.

  • Lap Meter Lap Meter GT-B27

    Lap Meter is used for testing the segment evenness of cotton lap at specified length, at the same time testing the weight and percentage of elongation of cotton lap.

  • Bursting Strength Tester Pneumatic Bursting Strength Tester GT-C12B

    Bursting Strength Tester is used for determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area.

  • Stiffness Tester Digital Pneumatic Stiffness Tester GT-C70B

    Digital Pneumatic Stiffness Tester is used to determine fabric stiffness using the ASTM circular bend test method.