Baby Stroller Testing Equipment Manufacturers Suppliers

This Stroller Handle Tester is suitable for baby trolley simulation over the barrier when the lifting and under the action of the durability test, the test method is to place the baby model in the car, raised when the car back to the ground 120±10mm, under pressure When the front wheel to the ground 120±10mm, 15±2 times per minute, and continue to test the number of times after the test, the visual car with or without damage.

This machine is to test the dynamic resistance of reversible and/or adjustable child vehicle handles.

Opening Size Tester (Dry Sieving)

Fabric Water-vapour Transmission Tester We can provide the technical support in many ways, such as: total testing solutions for laboratory, training, installation,commissioning, after-sales service, calibration and maintenance, repair and technical maintenance .

Cotton Fiber Testing Machine Manufacturers Suppliers

This tester adopt computer control system, used to determine the curl contraction and boiling water shrinkage of deformation silk.

Fully Automatic Environmental Battery Test Chamber GT-I20 Product Introduction Application: This chamber suitable for lithium-ion cells, modules and battery packs, as well as electronic testing applications. Key Specifications Model GT-I20 Capacity 225L Inside dimension (WxDxH) 500 x 500 x 750 mm Temperature Range (without humidity control) -40°C to +150°C, accuracy and uniformity ±1.0°C Temperature Range (with humidity control) 20°C to +100°C, humidity 20%-98%RH, ±2.5%RH Test Space Load Bearing Capacity 10 kg or higher, uniformly distributed load (UDL) Heat Load 1000W Inner Chamber Construction AISI-304 stainless steel, mirror finish Shelf Arrangement Two adjustable stainless steel shelving channels with adequate load bearing capacity Plenum Area Dedicated plenum section accommodating blower, heaters, evaporator and dehumidification system Entry Ports 1 No. LHS Ø100 mm and 1 No. RHS Ø50 mm insulated cable entry ports Port Construction Non-conductive silicone ports with removable silicone plugs Exterior Construction Minimum 14-gauge galvanized steel Door Construction Full access hinged insulated door with pull-action latch lock Door Features Limit switch and anti-condensation heaters Insulation High-density mineral wool insulation, up to 48 kg/m3, asbestos-free