This tester applies to all types of baby walking frame, used to walking frame seating dynamic strength test.

Test platform is made of a hardwood flooring pre-finished with polyurethane varnish material .it is used to prevention of falls down steps test and tip over test for baby walking frame.

Baby Stroller Testing Machine Rotating Test GT-MH22 Product Introduction Application: The tester can attach the vehicle by its wheels or axles to the rigid platform which can be orientated in an axis parallel to the ground. Slowly rotate the vehicle with the test mass through a specified angle to the horizontal both in a clockwise and anticlockwise direction such that the attachment devices alone transmit the test load to the chassis or seat unit , and maintain this position for an specified time in each direction. Satndards: EN 1888-2012 Section8.1.3.2.1 ,8.10.2, GB 14748-2006 Section 5.15 Feature 1.The test platform with wheel axle fixing device. 2.The test platform can rotate clockwise and counter clockwise. 3.Automatic judgment of specimen damage, automatic stop working. 4.Programmable control rotation angle, test frequency, cycle test, spacing interval 5.Can autosave when interruption of power supply, can choose to stop or continue to work 6.High precision angle sensor, can display table angle in real time. Key Specifications   Rotating speed 4±0.5rpm Control mode PLC Display mode 7 inch screen touch screen display Date display Angle, frequency Power supply AC 220V, 50Hz

Fabric Water-vapour Transmission Tester We can provide the technical support in many ways, such as: total testing solutions for laboratory, training, installation,commissioning, after-sales service, calibration and maintenance, repair and technical maintenance .

Footwear Testing Equipment Manufacturers Suppliers

BALLY Water Penetration Tester is used for determining the resistance of leather, artificial leather, fabric and so on footwear upper material to water penetration on flexing, in order to assess the suitability for the end use.

Atomizing Disinfection Robot GT-R800 Product Introduction Application: The atomizing disinfection robot is by quickly atomizing the disinfectant and automatically spraying into the disinfection area to get the air effectively purified. Using 100mg/L hypochlorous acid disinfectant, according to the amount of 5ml/m3, continue to spray evenly into the space to disinfect. It can be widely used in hospitals, airports, office buildings, shopping malls, schools, factories and other public places.   Feature Support the use of disinfectants such as hydrogen peroxide, sodium hypochlorite, and peracetic acid. The large-capacity 16L disinfectant tank can continuously disinfect for more than 5 ~ 6 hours, and the disinfection coverage is up to 4000 ~ 5000 m2. Support APP control, no-touch automated disinfection greatly improve the safety of use in the disinfection process. Two disinfection modes: timed disinfection and immediate disinfection. With autonomous navigation function, lidar obstacle avoidance, can fully cover the required area. Support automatic return to charge, human assistance isn’t required. When the disinfectant is below the warning position, it will return to the waiting area and turn off the spray device automatically. Key Specification   Model GT-R800 External Size(mm) φ500*1335 Atomization Efficiency 2L~3L/H(adjustable) Disinfectant Capacity 16L Spray Diameter 5-6m Disinfection Medium Hypochlorous acid,Chlorine dioxide,Hydrogen peroxide,Peroxyacetic acid, etc. Spray Method Four-direction spray, large opening spray(optional) Moving Way Autonomous path planning and automatic navigation Moving Speed 0~0.6m/s Power Supply AC220±10%V 50Hz Consumption 150W Drive Method Differential drive Ability to Cross Obstacles ±10mm Gradeability ≤8° Driving Channel Width ≥700mm Noise ≤50dB Operating Time 5~6h Battery Lithium battery 28AH 24V Charging Time 3~4h Safety System Lidar obstacle avoidance, power-off protection of disinfectant shortage Package Size Main Body 415*415*633mm Chassis 614*614*750mm Gross Weight Main Body 8.2kg Chassis 70.4kg