Inclined Surface Coefficient of Friction Tester GT-N36

This Paper cup Testing Equipment designed for test cup body stiffness for capacity cups, bowls, disposable plastic cups, tea cups and other products.

GT-N11 Sampling Cutter is to get the required special sampling of Ring Crush test.

Cardboard Stiffness Tester GT-N40 Product Introduction Application: Cardboard stiffness is the test of cardboard bending strength, the use of TABER (TABER) type stiffness tester. Suitable for determining the stiffness of paper and cardboard of low weight and thickness less than 1mm, the cardboard stiffness tester is the international standard common Taber (Taber) type stiffness tester. The instrument is suitable for paper and cardboard bending strength indicators, is the determination of cardboard stiffness of the special instrument. Standards: ISO 5628, ISO 2493-2, GB2679.3, QB/T 1051, GB/T 22364, TAPPI T489 Principle Designed according to the principle of equilibrium of the moment against the center of the rotating axis. The moment required for a piece of specimen, which is clamped vertically to the free end of the specimen, to be bent at an angle of 15° under the set conditions is the degree of the specimen, in units of MN, M. Feature The instrument adopts bilateral measurement and calculates the average value for more accurate data. Equipped with precision bearings to reduce friction. Mechanical structure, economical and practical. Key Specifications Model GT-N40 Measuring range (1-500)mN.m(divided into 7 ranges) Display error ±2% (10% to 90% of the upper limit value for each grade) Variability ≤2% (10% to 90% range of the upper limit of measurement for each grade) Pendulum arm length 100mm Load force arm length 50mm±0.1mm Test speed 200°±20°/min Rated bending angle 7.5°±0.3° and 15°±0.3° Sample size 70mm×38mm (L×W) Environmental Conditions Temperature 20–40℃, Relative Humidity ≤85% External dimension 240 ×230×350 mm (L×W×H) Weight About 15.5kg

The GESTER GT-N35 COF tester designed to measure both static and dynamic coefficients of friction (COF) for paper, cardboard, plastic films, and rubber. Compliant with international benchmarks like ASTM D1894, ISO 8295, and TAPPI T816, this equipment features high-precision microcomputer controls to ensure reproducible slipping properties for packaging optimization. Its high-resolution TFT LCD display visualizes real-time force curves, while an integrated high-speed thermal micro-printer delivers direct statistical analysis reports without maintenance hassle.

Automatic Paper Thickness Tester | paper testing equipment manufacturer supplier

This Schopper Air Permeability Tester was designed according to QB/T1667. It is used to test the air permeability of materials like paper, bag of cement, cable paper and so on.

Lab Automatic Bar Coater

paper testing instruments