products

Mask Flame Retardant Tester GT-RA06

GESTER Mask Flame Retardant Tester GT-RA06.  Flame retardant tester for Medical mask.
  • Brand:

    GESTER
  • Item NO.:

    GT-RA06
  • Order(MOQ):

    1
  • Product Detail

Mask Flame Retardant Tester GT-RA06

 

Product Introduction

Application:

Mask Flame Retardant Tester is a special test instrument for flame retardant performance of medical masks,  to test the flammability performance of medical mask after contacting with flame at a certain linear speed.

 

Standards:

GB 19083, YY 0469, GB 2626, EN 149, IS 9473, EN 14325

 


Instrument characteristics

1. The mask fixture is a metal human head mold, which can simulate the actual use situation of the mask.
2. The burner is equipped with a combustible gas interface, such as propane (liquefied gas).
3. Burner height is adjustable.
4. Burner could be timing and positioning automatic.
5. Burning time and flame retardant time are automatically recorded and displayed digitally
6. Mask Flame Retardant Tester is equipped with flame temperature measuring probe and flame temperature display.

Key Specification

 

Model

GT-RA06

Linear speed of the tip of nose on head model

(60 ± 5) mm / s

Flame height

Initial height 40±4mm(adjustable)

Diameter of flame temperature measuring probe

1.5mm

The temperature of the flame

(800 ± 50) ℃ at a height of (20 ± 2) mm from the top of the burner

Distance between top of the burner and lowest point of the mask

(20 ± 2) mm

Adjustment range of burner height

30mm

Thickness of the metal mold

2 ~ 3mm, flame resistant.

Timer of burning time and smoldering time

0-99.99 seconds, accuracy: ± 0.1 seconds

Gas

Propane gas

Weight

100kg

Power supply

AC220V, 50Hz, 50W

 

EN149 testing machine

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Mask Leakage Tester
Protective Mask Leakage Tester GT-RA08B-2
Protective Mask Leakage Tester GT-RA08B-2 Product Introduction Application: This Mask Testing Machine is to test the particulate leakage rate (TIL & IL) of mask, full face mask, breathing apparatus and gas mask.  Standards: BS EN149 8.5, TAJ 1001 PM, GB 2626, GB 2890   Feature Test chamber is made of glass Mask Leakage Tester Using the stainless steel for frame Mask Leakage Tester Using TSI photometer and flame photometer Protective Mask Leakage Tester Key Specification Model GT-RA08B-2 Test aerosol NaCl, Oil (Corn oil and paraffin oil) Aerosol Concentration Detector Flame photometer (For NaCl aerosol test) 2sets TSI Laser photometer (For oil aerosol test) 2sets Oil aerosol generator Particle concentration 20mg/m³~30mg/m³ Aerodynamics size distribution of particle Approx 0.02~2um Mass median diameter Aapprox 0.3um NaCl aerosol generator Particle concentration 4mg/m³~12mg/m³ Aerodynamics size distribution of particle Approx 0.02~2um Mass median diameter Aapprox 0.6um Aerosol occurrence amount ≥ 100L/min Sampling pump adjust range 0.50~4L/min Particle sampling flow 1~2L/min Aerosol concentration detector dynamic range 0.001~200mg/m³, accuracy 1%, response time ≤500ms Power requirement 1phase 220V 50Hz, 2KW Air requirement 0.5MPa, 120L/min Dimension Outer size of testing room: 2000mm×1600mm×2600mm(L×W×H) Control cabinet: 880mm×520mm×1400mm (L×W×H) Accessories: Standard accessories 2sets Flame photometer 2sets TSI Laser photometer 1set NaCl aerosol generator 1set Oil aerosol generator
Read More
Medical Face Mask Synthetic Blood Penetration Resistance Tester
Mask Synthetic Blood Penetration Tester GT-RA01
Medical Face Mask Synthetic Blood Penetration Resistance Tester determine the resistance of medical protective masks to the penetration of synthetic blood under different test pressures.
Read More
Mask BFE Tester
Mask Bacterial Filtration Efficiency (BFE) Detector GT-RA02B
Mask Bacterial Filtration Efficiency (BFE) Detector,are mainly used for testing the bacterial filtration efficiency performance of masks applicable to metrological verification departments, scientific research institutes, medical mask production units and their related testing departments.
Read More
Mask Bacterial Filtration Efficiency Tester
Mask Bacterial Filtration Efficiency (BFE) Tester GT-RA02
Mask Bacterial Filtration Efficiency Tester is applied to test the filtration efficiency of mask.
Read More
Mask and Respirator Breathing Resistance Tester
Mask & Respirator Breathing Resistance Tester GT-RA03
Mask and Respirator Breathing Resistance Testerrcan be used to determine the inspiratory and expiratory resistance of masks under specified conditions.
Read More
Face Mask Differential Pressure Tester
Face Mask Differential Pressure Tester GT-RA04
medical face mask differential pressure tester is used to measure the air exchange pressure of the medical face mask or other fabric.
Read More
Air-purifying Particle Respiratory Protective Tester
Non-power Air-purifying Particle Respiratory Protective Tester GT-RA05
Non-power Air-purifying Particle Respiratory Protective Tester GT-RA05 For determining the carbon dioxide (CO2) volume of respiratory protective mask.
Read More
GESTER Mask Visual Field Tester
Mask Visual Field Tester GT-RA07
GESTER Mask Visual Field Tester GT-RA07 to determine whether field of vision under the mask meets the standard requirement or not.
Read More
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp