products

products categories

Download

Download Download file and products catalogue for lab testing equipment, including including Footwear Testing Equipment and Textile Testing Equipment and Toys Testing Equipment and Furniture Testing Equipment.

contact us

hot products

  • Mask Leakage Tester

    Protective Mask Leakage Tester GT-RA08B-2

  • Medical Face Mask Synthetic Blood Penetration Resistance Tester

    Mask Synthetic Blood Penetration Tester GT-RA01

  • Mask Bacterial Filtration Efficiency Tester

    Mask Bacterial Filtration Efficiency (BFE) Tester GT-RA02

  • Mask and Respirator Breathing Resistance Tester

    Mask & Respirator Breathing Resistance Tester GT-RA03

  • Face Mask Differential Pressure Tester

    Face Mask Differential Pressure Tester GT-RA04

  • Air-purifying Particle Respiratory Protective Tester

    Non-power Air-purifying Particle Respiratory Protective Tester GT-RA05

products
Mask Synthetic Blood Penetration Tester GT-RA01 Mask Synthetic Blood Penetration Tester GT-RA01 Mask Synthetic Blood Penetration Tester GT-RA01 Mask Synthetic Blood Penetration Tester GT-RA01 Mask Synthetic Blood Penetration Tester GT-RA01
Mask Synthetic Blood Penetration Tester GT-RA01
  • Brand:

    GESTER
  • Item No.:

    GT-RA01
  • Certificate:

    ISO 9001, UKAS, CE Certificates
contact now

Mask Synthetic Blood Penetration Tester GT-RA01

 

Product Introduction

Application:

Mask Synthetic Blood Penetration Tester determine the resistance of medical protective masks to the penetration of synthetic blood under different test pressures. This Mask Testing Equipment can also be used to determine the blood penetration resistance of other coating materials.

 

Standards:

GB 19083 section 5.5, YY/T 0691, YY 0469 section 5.5
ISO 22609, BS EN 14683
ASTM F2100, ASTM F1862


Instrument characteristics

1. The convex sample fixing device can simulate the actual state of use of a mask, leave a test target area without damaging the sample, and distribute the synthetic blood in the target area of the sample.

2. The special constant pressure spray device can spray a certain volume of synthetic blood in a controlled time.

3. GESTER Medical Face Mask Synthetic Blood Penetration Tester can fully simulate the human body's average blood pressure of 10.6kPa, 16kPa, and 21.3kPa spray speeds for testing.

4. Synthetic blood penetration resistance tester equipped with a target plate, which can block the high-pressure edge portion of the sprayed liquid flow, and only let the steady-state flow portion be sprayed on the sample, which increases the accuracy and repeatability of the liquid velocity sprayed on the sample.

Key Specification

 

Model

GT-RA01

Spraying distance

300mm305mm (can be adjustable)

Nozzle diameter

0.84mm

Spraying speed

450cm/s, 550cm/s, 635cm/s

Weight

35kg

Power

AC220V 50Hz

 

Mask Synthetic Blood Penetration Tester GT-RA01

 

EN 14683 testing equipment

ASTM F2100 mask testing equipment

inquiry now

main Products
  • Mask Leakage Tester Protective Mask Leakage Tester GT-RA08B-2

    Protective Mask Leakage Tester GT-RA08B-2 Product Introduction Application: This Mask Testing Machine is to test the particulate leakage rate (TIL & IL) of mask, full face mask, breathing apparatus and gas mask.  Standards: BS EN149 8.5, TAJ 1001 PM, GB 2626, GB 2890   Feature Test chamber is made of glass Mask Leakage Tester Using the stainless steel for frame Mask Leakage Tester Using TSI photometer and flame photometer Protective Mask Leakage Tester Key Specification Model GT-RA08B-2 Test aerosol NaCl, Oil (Corn oil and paraffin oil) Aerosol Concentration Detector Flame photometer (For NaCl aerosol test) 2sets TSI Laser photometer (For oil aerosol test) 2sets Oil aerosol generator Particle concentration 20mg/m³~30mg/m³ Aerodynamics size distribution of particle Approx 0.02~2um Mass median diameter Aapprox 0.3um NaCl aerosol generator Particle concentration 4mg/m³~12mg/m³ Aerodynamics size distribution of particle Approx 0.02~2um Mass median diameter Aapprox 0.6um Aerosol occurrence amount ≥ 100L/min Sampling pump adjust range 0.50~4L/min Particle sampling flow 1~2L/min Aerosol concentration detector dynamic range 0.001~200mg/m³, accuracy 1%, response time ≤500ms Power requirement 1phase 220V 50Hz, 2KW Air requirement 0.5MPa, 120L/min Dimension Outer size of testing room: 2000mm×1600mm×2600mm(L×W×H) Control cabinet: 880mm×520mm×1400mm (L×W×H) Accessories: Standard accessories 2sets Flame photometer 2sets TSI Laser photometer 1set NaCl aerosol generator 1set Oil aerosol generator

  • Mask BFE Tester Mask Bacterial Filtration Efficiency (BFE) Detector GT-RA02B

    Mask Bacterial Filtration Efficiency (BFE) Detector,are mainly used for testing the bacterial filtration efficiency performance of masks applicable to metrological verification departments, scientific research institutes, medical mask production units and their related testing departments.

  • Mask Bacterial Filtration Efficiency Tester Mask Bacterial Filtration Efficiency (BFE) Tester GT-RA02

    Mask Bacterial Filtration Efficiency Tester is applied to test the filtration efficiency of mask.

  • Mask and Respirator Breathing Resistance Tester Mask & Respirator Breathing Resistance Tester GT-RA03

    Mask and Respirator Breathing Resistance Testerrcan be used to determine the inspiratory and expiratory resistance of masks under specified conditions.