products

Neutral Salt Spray Test Chamber GT-F50BA

Salt Spray Test Chamber Manufacturers Suppliers
  • Brand:

    GESTER
  • Item NO.:

    GT-F50BA
  • Order(MOQ):

    1
  • Product Detail

Neutral Salt Spray Test Chamber GT-F50BA


Product Introduction

Application:

Salt spray tester: It aims at determining the product corrosion resistance after various kinds of materials surface suffering electroplating, anodizing, painting, rust-proof oil corrosion resistance treatment.
Salt Spray Test Chamber is suitable for neutral salt spray test (NSS).


Standards:

CNS3627, 3885, 7669, 8886,
JIS D-0201, H-8502, K-5400, Z-2371,
ISO 3768, EN 248
ASTM B-117, B-268,
GB-T2423

DIN 50021-SS


Feature:

  1. The whole Salt Spray Machine adopts material of 5mm import gray PVC sheet, Internal adopts advanced band produced three-dimensional reinforcement technology, with strong structure, no deformation, acid and alkali resistance, high temperature resistance, and no aging. It is applied to all kinds of test specifications such as salt spray, copper acetate, etc.
  2. Heating method: test room adopts steam direct heating method, temperature rise fast and uniform, reduce the standby time, the heating tube is made from titanium tube with high corrosion resistance.
  3. Hopper: 2 built-in spray quantity collection cylinder (only one 60 type ), comparing to the traditional external type, it does not easily break down.
  4. Laboratory commodity shelf uses plane dividing shelf, commodity shelf is the ¢10mm toughened glass rod with corrosion resistance. Plastic steel V type shelf and glass rod placing objects make sure the sample 30 degree bevel angle, the angle can be arbitrarily adjusted,the direction of spray falling around is the same as the direction of spay receiving, test piece is set with large quantity.
  5. Salt Spray Cabinet body support: SECC U-bar with angle iron spray paint, four wheel slide and can be pushed for moving( limit use for 120 L type or more than 120 L).
  6. Pressure barrel: 2.0MMSUS201 stainless steel seamless welding.
  7. Heating delivery: titanium tube used, long service life, high degree corrosion resistance.
  8. Salt Spray Test Equipment cover: made of 5MM import transparent acrylic sheets, exquisite workmanship, beautiful appearance.
  9. Dual function of over-temperature protection attached, when over-temperature the warning display and cut off the heater power to make sure safe use.
  10. Including automatic spray exhausting device. Can clear observe the sample in the test room.
  11. Sample supplement jar adopts hidden and water level perspective window attached, it is easy to clean and not easy cracking.


salt spray chamber specification

 

Model

GT-F50BA-1

GT-F50BA-2

GT-F50BA-3

GT-F50BA-4

GT-F50BA-5

Inside Chamber Dimension

(WxDxH cm)

60x45x40

90x60x50

120x100x50

160x100x50

200x120x60

Outside Chamber Dimension

(WxDxH cm)

107x60x118

141x88x128

190x130x140

230x140x140

270x150x150

Test Chamber Volume

108L

270L

600L

800L

1440L

Brine Tank

15L

25L

40L

40L

40L

Control Method

Touch Screen

Plastic Plate Thickness

5mm

Temperature of Test Chamber

Brine test method 35℃±1℃

Temperature of  Pressure Barrel

Brine test method 47℃±1℃

Brine Temperature

35℃~ 50℃

Brine Concentration

5% sodium chloride solution concentration

Compressed Air Pressure

1.00±0.01kgf/cm2

Spray Volume

1.0~2.0ml/80cm2/h(gather at least 16 hours, take its average)

Relative Temperature of Test Chamber

Above 85%

PH-value

Neutral: 6.5~7.2

Spray Method

continuous spray or intermittent spray

Power Supply

AC220V1Φ10A

AC220V1Φ15A

AC220V1Φ30A

Temperature Range

Laboratory temp.

35℃- 50℃(can be arbitrarily set)

Pressure barrel temp.

47℃- 63℃(can be arbitrarily set)

Temperature Rising Speed

Laboratory

Room temperature →35℃  

about 35 minutes

Pressure barrel

Room temperature →47℃  

about 15 minutes

Temp. accuracy

±1℃


Neutral Salt Spray Test Chamber GT-F50BA

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
cyclic corrosion test chamber
Touch Screen Salt Spray Cabinet GT-F50BB
Salt Spray Cabinet corrosion test chamber is suitable for neutral salt spray test (NSS) and acidic corrosion experiment (AASS, CASS).
Read More
vertical flammability test
Vertical Combustibility Tester GT-C35B
This combustibility tester to determine the flammability resistance of vertically oriented fabrics and soft fabric toys.
Read More
Shoes Flexing Tester
Shoes Flexing Tester GT-KA01-3
Shoes Flexing Tester 2 or 4 Test position
Read More
Shoe Lining Leakproofness Tester
Shoe Lining Leakproofness Tester GT-KA15
Shoe Lining Leakproofness Tester is used to fast determine the waterproof resistance of rubber shoes and shoe inner liner.
Read More
maeser flex test
New Design Maeser Flexing Testing Machine GT-KC05-2
Maeser Flexing Tester is used to determine the resistance of leather, artical leather, fabric and so on material to water penetration on flexing.
Read More
Bursting Strength Tester
Pneumatic Bursting Strength Tester GT-C12B
Bursting Strength Tester is used for determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area.
Read More
Bursting Strength Tester
Bursting Strength Tester GT-C12A
The Hydraulic Bursting Strength Tester GT-C12A designed to determine the bursting strength and distension at burst of woven, knitted, and non-woven fabrics, papers, and boards. It complies with multiple international standards, including ISO 13938.1 and ASTM D3786, and features an intuitive touch screen controller, automatic burst detection, and four test methods. With a pressure range of 2.00 to 10.000 MPa and options for different test areas, it ensures accurate and reliable results for quality control in textile, paper, and packaging industries.
Read More
humidity chamber
Temperature and Humidity Climatic Test Chamber GT-C52
GESTER Temperature and Humidity Climatic Test Chamber GT-C52 is a high-performance laboratory environmental simulation device designed specifically for the reliability testing, quality assessment, and R&D validation of electronic components, automotive parts, fabric, leather, packaging materials, and various industrial products. By precisely controlling temperature (-60°C to +150°C) and humidity (20% to 98% RH), it subjects products to accelerated aging, performance limit, and environmental adaptability tests under controlled cyclic conditions. Its advanced touchscreen controller supports complex multi-segment program editing (accommodating up to 120 program groups), offering intuitive operation and reliable data; it is an ideal choice for meeting the testing requirements of international standards such as ISO and ASTM.
Read More
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsapp