BS5852 Flammability Tester GT-C93

Laboratory drying oven used to the color fastness to perspiration drying testing for a variety of textiles, also can be used to the  heating at high temperatures and drying testing for other products.

Atomizing Disinfection Robot GT-R800 Product Introduction Application: The atomizing disinfection robot is by quickly atomizing the disinfectant and automatically spraying into the disinfection area to get the air effectively purified. Using 100mg/L hypochlorous acid disinfectant, according to the amount of 5ml/m3, continue to spray evenly into the space to disinfect. It can be widely used in hospitals, airports, office buildings, shopping malls, schools, factories and other public places.   Feature Support the use of disinfectants such as hydrogen peroxide, sodium hypochlorite, and peracetic acid. The large-capacity 16L disinfectant tank can continuously disinfect for more than 5 ~ 6 hours, and the disinfection coverage is up to 4000 ~ 5000 m2. Support APP control, no-touch automated disinfection greatly improve the safety of use in the disinfection process. Two disinfection modes: timed disinfection and immediate disinfection. With autonomous navigation function, lidar obstacle avoidance, can fully cover the required area. Support automatic return to charge, human assistance isn’t required. When the disinfectant is below the warning position, it will return to the waiting area and turn off the spray device automatically. Key Specification   Model GT-R800 External Size(mm) φ500*1335 Atomization Efficiency 2L~3L/H(adjustable) Disinfectant Capacity 16L Spray Diameter 5-6m Disinfection Medium Hypochlorous acid,Chlorine dioxide,Hydrogen peroxide,Peroxyacetic acid, etc. Spray Method Four-direction spray, large opening spray(optional) Moving Way Autonomous path planning and automatic navigation Moving Speed 0~0.6m/s Power Supply AC220±10%V 50Hz Consumption 150W Drive Method Differential drive Ability to Cross Obstacles ±10mm Gradeability ≤8° Driving Channel Width ≥700mm Noise ≤50dB Operating Time 5~6h Battery Lithium battery 28AH 24V Charging Time 3~4h Safety System Lidar obstacle avoidance, power-off protection of disinfectant shortage Package Size Main Body 415*415*633mm Chassis 614*614*750mm Gross Weight Main Body 8.2kg Chassis 70.4kg

Shaking Water Baths widely applicable for laboratory researches on bacteria cultivation, fermentation, hybridization, chemical and biochemical reaction, enzymes and tissues research,which have a high requirement on precision of shaking speed and temperature.

SATRA TM103 Elastic Tape Fatigue Testing Machine

Percentage of trash content of raw cotton, Cotton lap and all kinds of fiber.

Intelligent Heating Thermostatic Magnetic Agitator GT-C99   Product Introduction Application: Intelligent Magnetic Stirrer using exclusive square ceramic heating plate for beauty and corrosion resistance. Unique heating methods (patent applied), the maximum surface temperature can up to 350℃. The digital speed display. Magnetic hotplate stirrer: using fuzzy PID controller, dual digital display, self-determining function, with high measurement accuracy, low red temperature, single button operation, silicon control, thermocouple measure in inside or outside, silicon control output, 160-240V voltage with wide range and temperature protection function. Magnetic mixer hot plate: can heat and mix the flask of 50-1000ml(Standard or non-standard). Electric motor by using AC frequency conversion, durable, stable performance, lower noise without spark. Enclosure of the PBT plastic 94VO are generated once only with high temperature resistance, anti corrosion and good insulation. Suit for sitting and standing position perspective with 30 ° bevel operation control panel. Running stable, step-less speed regulation and high-speed stronger. Key Specification Model GT-C99-5 GT-C99-10 Working Position 5 10 Heating Temperature Surface temperature up to 350 degree Heating Disk Size 450*105mm   450*190mm Heating Power 500W 750W Temperature Control Type Intelligent PID control, silicon control, Thermocouple measure in inside or outside Temperature Control Precision ±1℃( adjustable) Furnace Wire Cr20Ni80 Mixing Capacity 5*500ml 10*500ml Motor Power 5*8W 10*8W Stirring speed 50~180r/min( adjustable) Hours of Service Continuous Dimensions 480*280*230mm 480*365*230mm Weight 7000±200g 9500±200g

Sealing Tester GT-N69B Product Introduction Application This sealing tester is suitable for sealing tests of flexible packaging components in the food, pharmaceutical, daily chemical, and electronics industries. The machine compare and evaluate the sealing processes and performance of flexible packaging components, providing a scientific basis for determining relevant technical indicators. It can also test the sealing performance of specimens after drop and pressure tests. Compared to traditional designs, it truly achieves intelligent testing: multiple preset test parameters significantly improve testing efficiency; the pressure increment detection mode quickly yields sample leakage parameters, and it can also observe creep, rupture, and leakage conditions of samples under stepped pressure environments and different holding times. Parameters and test results can be printed (printer optional). Standards: YBB00052005-2015, GB/T 15171, GB/T27728-2011, GB 7544-2009, ASTM D3078, YBB00122002-2015 Sealing Tester Feature Fully automated testing process, one-button completion. Built-in high-precision sensor for faster response. Multiple modes available to meet the testing needs of different samples. Each mode has multiple preset parameters for quick selection. Dual gas path design for more accurate testing. Automatic accumulation of test group counts for statistical analysis. Optional dot matrix printer for saving and printing test results. Features test result saving, 500-record query, and printing functions (printer optional). Automatic vacuum maintenance and backflushing unloading. Ultra-thick acrylic vacuum chamber. Seal testing equipment equipped with a pressure regulating system for easy operation and maintenance. Three-level management access control. Gradient pressurization mode for more user-friendly operation. Real-time shutdown for longer pressure holding time and higher accuracy. Vacuum Sealing Tester Key Specifications Model GT-N69B-1 GT-N69B-2 GT-N69B-3 Size Φ270 mmx210 mm (H) Φ360 mmx585mm (H) Φ460 mmx330mm (H) Vacuum 0~-90kpa Response speed ＜5 ms Resolution ratio 0.01 Kpa Sensor accuracy ≤0.5 level Mode Single-point mode, incremental mode Data export USB Disk/ Micro printer (Optional) Control method Microcontroller / Computer (Optional) Screen 7-inch Touch screen Pressure adjust range 0.2MPa～0.7MPa Connector Size Φ6mm Vacuum Holding Time 0-999,999 s Air supply Compressed air (provided by the user)

Feeler Gauge is used to determine whether parts on toys can be stepped up so as to determine whether the tensile testing is necessary.