Fully Automatic Environmental Battery Test Chamber GT-I20 Product Introduction Application: This chamber suitable for lithium-ion cells, modules and battery packs, as well as electronic testing applications. Key Specifications Model GT-I20 Capacity 225L Inside dimension (WxDxH) 500 x 500 x 750 mm Temperature Range (without humidity control) -40°C to +150°C, accuracy and uniformity ±1.0°C Temperature Range (with humidity control) 20°C to +100°C, humidity 20%-98%RH, ±2.5%RH Test Space Load Bearing Capacity 10 kg or higher, uniformly distributed load (UDL) Heat Load 1000W Inner Chamber Construction AISI-304 stainless steel, mirror finish Shelf Arrangement Two adjustable stainless steel shelving channels with adequate load bearing capacity Plenum Area Dedicated plenum section accommodating blower, heaters, evaporator and dehumidification system Entry Ports 1 No. LHS Ø100 mm and 1 No. RHS Ø50 mm insulated cable entry ports Port Construction Non-conductive silicone ports with removable silicone plugs Exterior Construction Minimum 14-gauge galvanized steel Door Construction Full access hinged insulated door with pull-action latch lock Door Features Limit switch and anti-condensation heaters Insulation High-density mineral wool insulation, up to 48 kg/m3, asbestos-free