Battery Drop Tester GT-I02 Product Introduction Application: This drop tester is suitable for free fall testing of small consumer electronic products and components such as mobile phones (cell phones), mobile phone lithium batteries, walkie-talkies, electronic dictionaries, building intercom phones, CD/MD/MP3 players, etc. Standards: GB 31241-2022, UL 1642, IEC62133-2012, GB/T36276-2020 Main Features and Functions This battery pack drop tester adopts a pneumatic structure. The test specimen is placed in a dedicated fixture (with adjustable stroke) and clamped securely. Pressing the drop button releases the cylinder, and the test piece will undergo a free fall test. Battery drop tester Key Specifications Model GT-I02 Drop height 300~1500mm (adjustable) Display Accuracy 1mm Height error ±5mm Display Mode PID Maximum specimen weight 10kg±100g Specimen Dimensions ( L×W ) 220×150 mm Drop test medium Steel plate Test Drop Point Free fall Drop method Pneumatic drop Lifting Method Electric lifting Operating Air Pressure <2 MPa (User supply air source) Machine dimensions ( W×D×H ) 650×560×1700mm Height Setting Encoder-displayed height, intelligent control (350–1500 digitally adjustable, very convenient for users) Power supply AC 220V±10%, 50HZ Power 300W Weight Approx. 120 kg
Altitude Simulation Test Chamber GT-I18 Product Introduction Application: This test case is designed for UL, EN, IEC and other standard testing requirements. It can reach the low-pressure storage state of the sample in a short period of time, automatically control the test cycle, monitor the pressure changes inside the box throughout the process, and achieve automatic termination of the test. Simulate the storage of batteries and battery packs for 6 hours under conditions of pressure equal to or lower than 11.6kPa and ambient temperature of (20 ± 5) ℃. The batteries are considered qualified if they do not explode or ignite. Standards: GB/T 31485, GB/T 31241, UN38.3, IEC62133, UL 1642 Using Environment Requirement Environmental temperature: 0-50 ℃. Relative humidity: 45-85% RH. Atmospheric pressure: 86-106KPa. No direct sunlight or direct radiation from other heat sources. There is no strong vibration around. High-Altitude Simulation Chamber Key Specifications Model GT-I18 Inner box material SUS304 stainless steel plate, thickness 5.0mm Pressure range 5～100KPa Pressure Accuracy 0.1KPa Inner box dimensions 800x800x800mm Viewing windor The size is 300x350mm with two layers of tempered glass, and the transparent window is equipped with stainless steel mesh. Control mode Touch screen control Vacuum Time Free setting within 0-99H99 Pressure fluctuation ≤5%
English 
