Battery Drop Tester GT-I02 Product Introduction Application: This drop tester is suitable for free fall testing of small consumer electronic products and components such as mobile phones (cell phones), mobile phone lithium batteries, walkie-talkies, electronic dictionaries, building intercom phones, CD/MD/MP3 players, etc. Standards: GB 31241-2022, UL 1642, IEC62133-2012, GB/T36276-2020 Main Features and Functions This battery pack drop tester adopts a pneumatic structure. The test specimen is placed in a dedicated fixture (with adjustable stroke) and clamped securely. Pressing the drop button releases the cylinder, and the test piece will undergo a free fall test.   Battery drop tester Key Specifications Model GT-I02 Drop height 300~1500mm (adjustable) Display Accuracy 1mm Height error ±5mm Display Mode PID Maximum specimen weight 10kg±100g Specimen Dimensions ( L×W ) 220×150 mm Drop test medium Steel plate Test Drop Point Free fall Drop method Pneumatic drop Lifting Method Electric lifting Operating Air Pressure <2 MPa (User supply air source) Machine dimensions ( W×D×H ) 650×560×1700mm Height Setting Encoder-displayed height, intelligent control  (350–1500 digitally adjustable, very convenient for users) Power supply AC 220V±10%, 50HZ Power 300W Weight Approx. 120 kg

Fully Automatic Environmental Battery Test Chamber GT-I20 Product Introduction Application: This chamber suitable for lithium-ion cells, modules and battery packs, as well as electronic testing applications. Key Specifications Model GT-I20 Capacity 225L Inside dimension (WxDxH) 500 x 500 x 750 mm Temperature Range (without humidity control) -40°C to +150°C, accuracy and uniformity ±1.0°C Temperature Range (with humidity control) 20°C to +100°C, humidity 20%-98%RH, ±2.5%RH Test Space Load Bearing Capacity 10 kg or higher, uniformly distributed load (UDL) Heat Load 1000W Inner Chamber Construction AISI-304 stainless steel, mirror finish Shelf Arrangement Two adjustable stainless steel shelving channels with adequate load bearing capacity Plenum Area Dedicated plenum section accommodating blower, heaters, evaporator and dehumidification system Entry Ports 1 No. LHS Ø100 mm and 1 No. RHS Ø50 mm insulated cable entry ports Port Construction Non-conductive silicone ports with removable silicone plugs Exterior Construction Minimum 14-gauge galvanized steel Door Construction Full access hinged insulated door with pull-action latch lock Door Features Limit switch and anti-condensation heaters Insulation High-density mineral wool insulation, up to 48 kg/m3, asbestos-free