Fabric Stiffness Tester is to measure the fabric stiffness, in addition to determine the bending height, flexural rigidity and bending modulus of fabrics by simple procedures and calculations.
IMADA push pull scale can measure tension, compression force accurately, and durable, is an ideal product for industrial quality control, research and development field strength test.
Noise meter is used to measure the sound pressure level comes form sound toys in a predetermined distance. It meets standards: EN-71-1, ISO 8124-1, GB6675-2, ASTM F963, 16CFR 1500.
Two Part Metal Mould GT-KB29 Product Introduction Application: A two part metal mould with a lower block having a spherical recess of diameter 47.5 ± 0.5 mm, depth 9.3 ± 0.2 mm and radius of curvature 35.0 ± 0.5 mm and an upper block having a downward facing spherical dome of the same dimensions as the spherical recess in the lower block, such that the dome will fit into the recess. Key Specifications Model GT-KB29 Material Steel Dimensions(W×D×H) About 100 ´ 100 ´ 60 mm Weight About 4kg Standards IS 7554-2009 Annex A-1.10, IS 15844-1-2023 Section 4.10
Height Gauge GT-KB30 Product Introduction Application: The height gauge consisting of A.A flat plate with a clamping ring meeting the requirements and filled on its lower surface. B.A hole through the plate which is at the centre of the clamping ring and of diameter less than the clamping ring but large enough to allow the spindle of the thickness gauge to move freely within it. C.A thickness gauge which. has a spindle with a spherical lower surface of radius 1.5 ± 0.2 mm; applies a force of 0.55 ± 0.10 N to the spindle; is capable of measuring to the nearest 0.05 mm; and is mounted so that the spindle passes vertically through the hole in the flat plate. Key Specifications Model GT-KB30 Material Steel Dimensions(W×D×H) About 150 ´ 150 ´ 200 mm Weight About 10kg Standards IS 7554-2009 Annex A-1.14, 1.15; IS 15844-1-2023 Section 4.10
The TTF tensile tester is used for providing large and stable tensile during the tension test. in tensile. It is mostly used for the toys’ destructive tension test.