Baby Stroller Testing Equipment Manufacturers Suppliers

high chair testing machine manufacturers suppliers

The machine is mainly used to test the dynamic durability of the baby trolley on irregular surfaces.

The High Chair testing machine is specially designed for testing the impact strength of backrest and handrail.

This Stroller Handle Tester is suitable for baby trolley simulation over the barrier when the lifting and under the action of the durability test, the test method is to place the baby model in the car, raised when the car back to the ground 120±10mm, under pressure When the front wheel to the ground 120±10mm, 15±2 times per minute, and continue to test the number of times after the test, the visual car with or without damage.

The High Chair testing machine is specially designed for testing the distance between the backrest and the horizontal member of children’s high chair.

This machine is to test the dynamic resistance of reversible and/or adjustable child vehicle handles.

High Chair Seating Impact Testing Equipment GT-MJ31 Product Introduction Application: This tester applies to all types of high chairs, with 2 functions of chair seating impact and seating durability test. The purpose of this test is to evaluate the ability of the chair to withstand heavy and abusive impact forces on the seat and evaluate the ability of chairs to withstand fatigue stresses and wear caused by downward vertical force(s) on the seat. Standards: EN14988-2017 Section 5.17, 8.8.5 Feature 1.The main structure of the machine is made of aluminum, beautiful and easy to maintain. 2. Using PLC touch screen control, operation more convenient. 3. In addition, the machine loading device using electric control movements, more extensive test space.   Key Specification   Model GT-MJ31 Impactor Diameter 150mm Impactor Weight 23kg Cylinder Stroke 0~300mm Beam Stroke 900~1350mm Test Speed 10~30r/min Test Times 0~999999times, settable Control PLC touch screen control Dimensions(W×D×H) 150×150×200cm Weight ≈300Kg Air Source ≧7kgf/cm^2 stable air source Power 1∮ AC 220V 50Hz 5A   Accessories: 23kg Impactor    1pc

Toys Scooter Steering Tubes Strength Tester apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces.

Toys testing equipment

Needle Flame Tester is the latest release of the flaming test equipment, with imports of touch-screen controller and instrument. Apply to the test standards IEC60695,GB5169, etc.

Hot Wire Ignition Tester GT-MC38 Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing device Advanced power control system Multiple safety protection system Tempered glass window   Key Specification   Model GT-MC38 Internal dimensions 1120mm*600mm*1020mm (W*D*H) Internal volume ≥0.5m³ Controller 7-inch programmable controller Hot wire material Nickel-Chromium wire (Nickel 80%, Chromium 20%) Hot wire length 250mm Hot wire diameter 0.5mm Hot wire cold resistance 5.28Ω Hot wire power 0.26W/mm±4% Test time 0.01-999.99S can be set   Ignite time 0.01-999.99S Stop burning time 0.01-999.99S   Accessories Standard Accessories 1 pc  Hot wire 1 pc  Fixture 1.5metres  Current line 2.5metres  Exhaust pipe