high chair testing machine manufacturers suppliers

The High Chair testing machine is specially designed for testing the distance between the backrest and the horizontal member of children’s high chair.

High Chair Seating Impact Testing Equipment GT-MJ31 Product Introduction Application: This tester applies to all types of high chairs, with 2 functions of chair seating impact and seating durability test. The purpose of this test is to evaluate the ability of the chair to withstand heavy and abusive impact forces on the seat and evaluate the ability of chairs to withstand fatigue stresses and wear caused by downward vertical force(s) on the seat. Standards: EN14988-2017 Section 5.17, 8.8.5 Feature 1.The main structure of the machine is made of aluminum, beautiful and easy to maintain. 2. Using PLC touch screen control, operation more convenient. 3. In addition, the machine loading device using electric control movements, more extensive test space.   Key Specification   Model GT-MJ31 Impactor Diameter 150mm Impactor Weight 23kg Cylinder Stroke 0~300mm Beam Stroke 900~1350mm Test Speed 10~30r/min Test Times 0~999999times, settable Control PLC touch screen control Dimensions(W×D×H) 150×150×200cm Weight ≈300Kg Air Source ≧7kgf/cm^2 stable air source Power 1∮ AC 220V 50Hz 5A   Accessories: 23kg Impactor    1pc

Flammability Testing Nailed Fixture mainly used to test the inflaming retarding performance for solid and soft toys according to ASTM standard.

The GESTER GT-KC01-2 IULTCS & Veslic Tester is a high-efficiency laboratory testing instrument engineered to assess the rubbing color fastness and surface durability of natural leather, synthetic leather, plastics, and coated textiles. Featuring two independent testing stations, the iultcs veslic rub fastness tester allows laboratory technicians to perform simultaneous dry and wet rubbing fastness tests or run parallel sample evaluations, effectively doubling testing throughput. Fully compliant with ISO 11640, SATRA PM 173, and EN ISO 20344, the instrument evaluates finish adhesion, color bleeding, and surface degradation under controlled cyclic pressure using standard white wool felt pads. It is widely used in commercial testing laboratories, tannery R&D centers, footwear manufacturing facilities, and automotive trim production lines.

This Falling-Pendulum Type Tearing Tester can be used to test the Determination of tear resistance of textile, non-woven fabrics, paper, paperboard, thin film, ventilation tape, sheet metal etc.

Wet-resistant Bacterial Penetration Tester Engineers service on site to install and commissioning overseas.

Fabric Testing Instruments and Equipment's Manufacturers Suppliers