MARK II Slip Resistance Tester GT-KB49

James Slip Resistance Property Tester is used determine the dry static coefficient of friction of shoe sole and the heel materials.

Static Slip Resistance Tester is to determine static slip resistance of outsole, heel and related outsole materials of footwear.

The GESTER GT-KB48 is designed to scientifically test footwear slip resistance. Its primary function is to measure the dynamic coefficient of friction (COF) between a shoe sole and walkway surfaces (e.g., wood, PVC, tile) under lubricated conditions. The shoe slip resistance tester applies a set load and moves the test surface horizontally against a fixed specimen, quantifying kinetic friction force. This enables objective judgment of slip resistance, ensuring compliance with international standards like ISO 13287, ASTM F2913, and SATRA TM144, thereby helping prevent accidents.

ASTM C1028 Tile Static Friction Coefficient Testing machine

Particulate Filter Efficiency Tester, PFE Tester In stock, fast delivery.

This Single Wing Falling Tester GT-LC05-1 is designed to test the damage of product packaging and to evaluate the impact resistance during transport.

Softness tester can be used to determine the softness of high-grade toilet paper, tobacco flakes, fiber paper products and other materials.

Fully Automatic Environmental Battery Test Chamber GT-I20 Product Introduction Application: This chamber suitable for lithium-ion cells, modules and battery packs, as well as electronic testing applications. Key Specifications Model GT-I20 Capacity 225L Inside dimension (WxDxH) 500 x 500 x 750 mm Temperature Range (without humidity control) -40°C to +150°C, accuracy and uniformity ±1.0°C Temperature Range (with humidity control) 20°C to +100°C, humidity 20%-98%RH, ±2.5%RH Test Space Load Bearing Capacity 10 kg or higher, uniformly distributed load (UDL) Heat Load 1000W Inner Chamber Construction AISI-304 stainless steel, mirror finish Shelf Arrangement Two adjustable stainless steel shelving channels with adequate load bearing capacity Plenum Area Dedicated plenum section accommodating blower, heaters, evaporator and dehumidification system Entry Ports 1 No. LHS Ø100 mm and 1 No. RHS Ø50 mm insulated cable entry ports Port Construction Non-conductive silicone ports with removable silicone plugs Exterior Construction Minimum 14-gauge galvanized steel Door Construction Full access hinged insulated door with pull-action latch lock Door Features Limit switch and anti-condensation heaters Insulation High-density mineral wool insulation, up to 48 kg/m3, asbestos-free