Tile Static Friction Coefficient Tester GT-KB65

MARK II Slip Resistance Tester is to determine maximum static friction of test specimen and floor by ratio of load horizontal force and vertical force.

James Slip Resistance Property Tester is used determine the dry static coefficient of friction of shoe sole and the heel materials.

Static Slip Resistance Tester is to determine static slip resistance of outsole, heel and related outsole materials of footwear.

The GESTER GT-KB48 is designed to scientifically test footwear slip resistance. Its primary function is to measure the dynamic coefficient of friction (COF) between a shoe sole and walkway surfaces (e.g., wood, PVC, tile) under lubricated conditions. The shoe slip resistance tester applies a set load and moves the test surface horizontally against a fixed specimen, quantifying kinetic friction force. This enables objective judgment of slip resistance, ensuring compliance with international standards like ISO 13287, ASTM F2913, and SATRA TM144, thereby helping prevent accidents.

The GESTER GT-C75-2 gsm fabric cutter is designed for rapid and effort-saving 100cm² specimen cutting. Engineered with a powerful hand-press lever mechanism, high-strength cast iron frame, and reversible German Schröder blades, it effortlessly slices through thick, multi-layer, and heavy-density textiles up to 5mm depth.

Torque Test for Toys Torque Clamp Middle is the assistant tool for toys torque test.

luggage testing equipment Manufacturers Suppliers

This GT-KC13B Martindale Abrasion Tester measures the wear and abrasion resistance of footwear vamps, natural leather, rubber outsoles, and upper textiles. It drives specimens against a standard abradant in a precise 60mm x 60mm Lissajous motion path at a regulated speed of 47.5 ± 2.5 r/min. Available in 4, 6, 8, and 9 working stations, it features an intelligent PLC touch screen and interchangeable standard weights supporting 9kPa and 12kPa nominal pressures. A unique quick-release system allows technicians to extract individual sample holders for evaluation without halting other active stations or lifting the top plate. It fully complies with ISO 20344, ASTM D4966, ISO 12947, and SATRA TM31.