Brand:
GESTERItem NO.:
GT-KB03Order(MOQ):
1Payment:
TT OR L/CProduct Origin:
ChinaShipping Port:
Xiamen PortLead Time：
In stock, 7days Fast DeliveryProduct Detail
|
Application: DIN Abrasion tester GT-KB03 is used to determine wear performance test of materials like elastic material, rubber, tires, conveyor belts, conveyor belts, shoe soles.
ISO 4649, DIN 53516, ISO 20871, EN ISO 20344 (Section 8.3) ASTM D5963, BS903-A9 Method A, JIS K6369, JIS K6264-2 SATRA TM174, SATRA TM193, EN 12770, QB/T 2884, GB/T 20991 (Section 8.3) |
Principle:
|
Model |
GT-KB03B-1 |
|
|
Diameter of wear wheel |
150mm |
|
|
Specimen dimension |
ø16.2 mm x thickness 6-10 mm |
|
|
Specimen moving speed |
4.2 mm/r |
|
|
Weights |
Holder 2.5N, can be used arbitrarily with optional accessory 2.5N, 5N (each for one) |
|
|
Wear wheel speed |
40±1rpm |
|
|
Inclination angle |
3°, Test piece support shaft of test piece becomes vertical angle with roller. |
|
|
Grit size of sandpaper |
#60 |
|
|
Roller length |
460mm |
|
|
Wear stroke |
40m |
|
|
Power supply |
1∮AC 220V 50/60HZ 3A |
|
|
Dimensions (L x W x H) |
700 x 300 x 300 mm |
|
|
Weight |
55kg |
|
Accessories:
|
Standard accessories |
1pc |
2.5N weights |
|
1pc |
5N weights |
|
|
1pc |
P60# standard abrasive paper |
|
|
1pc |
Standard cutting die |
|
|
1pc |
Metal blob(Grinding head) |
|
|
1pc |
2mm Guage |
|
|
1pc |
Power line |
|
|
Option accessories |
Optional |
GT-G203H Electronic balance (210g,accuracy 1mg) |
|
Optional |
Standard rubber |
Application Industry of DIN abrasion tester
Q1: What materials can be tested on the GT-KB03 DIN Abrasion Tester?
A: The GT-KB03 is designed for vulcanized natural or synthetic rubber, thermoplastic elastomers (TPE/TPR), shoe soles, tires, rubber hoses, conveyor belting, and rigid polymer materials requiring friction wear characterization.
Q2: How is the abrasion resistance result calculated on a DIN Abrasion Tester?
A: Result is expressed as relative volume loss (mm3). The specimen is weighed before and after the 40-meter run on the P60 abrasive drum. Mass loss is divided by specimen density and corrected using a calibration factor derived from testing a Standard Reference Rubber on the same abrasive paper.
Q3: How often should the P60 abrasive paper be calibrated or replaced?
A: Abrasive paper performance degrades over time. It must be calibrated regularly using standard reference rubber. When the mass loss of the standard reference rubber falls outside the range specified by ISO 4649 (typically 180mg ~ 220mg), the abrasive paper must be replaced.
Q4: Is a sample preparation die included with the machine?
A: Yes, GESTER includes a standard ø16.2mm cylindrical cutting die with the GT-KB03, allowing laboratory technicians to quickly punch uniform samples from sheet material or finished shoe soles.
Friendly Links :
English 
