Noise meter is used to measure the sound pressure level comes form sound toys in a predetermined distance. It meets standards: EN-71-1, ISO 8124-1, GB6675-2, ASTM F963, 16CFR 1500.
Two Part Metal Mould GT-KB29 Product Introduction Application: A two part metal mould with a lower block having a spherical recess of diameter 47.5 ± 0.5 mm, depth 9.3 ± 0.2 mm and radius of curvature 35.0 ± 0.5 mm and an upper block having a downward facing spherical dome of the same dimensions as the spherical recess in the lower block, such that the dome will fit into the recess. Key Specifications Model GT-KB29 Material Steel Dimensions（W×D×H） About 100 ´ 100 ´ 60 mm Weight About 4kg Standards IS 7554-2009 Annex A-1.10, IS 15844-1-2023 Section 4.10
Bite Tester is used to test whether the toys has cracked after bite test, and if it has produced hazardous sharp points, hazardous sharp edges, and hazardous small parts after crack.
The EN Drop Tester is to determine the toys fall on the floor through a certain height, fall in a certain number, then check whether the hazardous sharp points, hazardous sharp edges, hazardous small parts and hazardous driving mechanisms have become accessible.
Pilling Assessment Box; Suitable for all standards where the assessment of pilling on fabrics is necessary, whether against control fabrics or photographs.
English 
