Fully Automatic Environmental Battery Test Chamber GT-I20 Product Introduction Application: This chamber suitable for lithium-ion cells, modules and battery packs, as well as electronic testing applications. Key Specifications Model GT-I20 Capacity 225L Inside dimension (WxDxH) 500 x 500 x 750 mm Temperature Range (without humidity control) -40°C to +150°C, accuracy and uniformity ±1.0°C Temperature Range (with humidity control) 20°C to +100°C, humidity 20%-98%RH, ±2.5%RH Test Space Load Bearing Capacity 10 kg or higher, uniformly distributed load (UDL) Heat Load 1000W Inner Chamber Construction AISI-304 stainless steel, mirror finish Shelf Arrangement Two adjustable stainless steel shelving channels with adequate load bearing capacity Plenum Area Dedicated plenum section accommodating blower, heaters, evaporator and dehumidification system Entry Ports 1 No. LHS Ø100 mm and 1 No. RHS Ø50 mm insulated cable entry ports Port Construction Non-conductive silicone ports with removable silicone plugs Exterior Construction Minimum 14-gauge galvanized steel Door Construction Full access hinged insulated door with pull-action latch lock Door Features Limit switch and anti-condensation heaters Insulation High-density mineral wool insulation, up to 48 kg/m3, asbestos-free
Horizontal Rain Spray Test Chamber GT-F62 is an all-in-one water ingress testing system engineered to perform IPX1, IPX2, IPX3, IPX4, IPX5, and IPX6 protection tests in a single unit. Fully compliant with IEC 60529, GB 4208, GB 2423.38, and GB 4706.32, it evaluates the water resistance of automotive components, electronics, electrical cabinets, and lighting products under simulated rainy conditions. the Rain Test Chamber GT-F62 is available in 500L, 1000L, and 1500L capacity options. Controlled via a PLC touchscreen panel (Teelong), it integrates a 15° tiltable turntable, an R400/R600mm oscillating swing pipe, and an electric swinging spray head mechanism for IPX5/6 testing.
The GT-A08B Touch Screen Yarn Twist Tester is a high-precision digital instrument for measuring yarn twist in single and plied yarns, fully compliant with ISO 2061, ASTM D1422, and ASTM D1423 standards. Featuring a user-friendly touch screen, it supports both the untwist-retwist method and direct counting method to accurately determine S/Z twist direction, TPI/TPM, and twist shrinkage. Designed for textile laboratories, this electronic twist counter utilizes a robust motor-driven system and adjustable tension weights to ensure consistent results across cotton, wool, and synthetic fibers.
English 
