The GESTER GT-C52 is a high-performance environmental test chamber engineered for precise simulation of extreme temperature and humidity conditions. Designed for conditioning samples prior to testing and conducting alternating high-low temperature and humidity tests, it supports programmable control of temperature, humidity, and time. With a temperature range from -60°C to +150°C and humidity control from 20% to 98% RH, the temperature humidity chamber is ideal for reliability testing across industries such as electronics, automotive, aerospace, fabric, leather.
GESTER Temperature and Humidity Climatic Test Chamber GT-C52 is a high-performance laboratory environmental simulation device designed specifically for the reliability testing, quality assessment, and R&D validation of electronic components, automotive parts, fabric, leather, packaging materials, and various industrial products. By precisely controlling temperature (-60°C to +150°C) and humidity (20% to 98% RH), it subjects products to accelerated aging, performance limit, and environmental adaptability tests under controlled cyclic conditions. Its advanced touchscreen controller supports complex multi-segment program editing (accommodating up to 120 program groups), offering intuitive operation and reliable data; it is an ideal choice for meeting the testing requirements of international standards such as ISO and ASTM.
GT-C52F Walk-in Temperature Humidity Chamber is an industrial-grade climate test room engineered for large-capacity, long-term temperature, and humidity testing on automotive electronics, battery systems, aerospace parts, and industrial equipment. Fully compliant with GB/T 5170.2, GB 2423, GB 11158 standards, the GT-C52F features modular polyurethane insulation panels, high-precision microcomputer PID control, and energy-efficient refrigeration systems. Built by GESTER—a direct climate chamber manufacturer with nearly 30 years of expertise—it delivers factory-direct reliability, exact climate simulation, and full customization options.
Fully Automatic Environmental Battery Test Chamber GT-I20 Product Introduction Application: This chamber suitable for lithium-ion cells, modules and battery packs, as well as electronic testing applications. Key Specifications Model GT-I20 Capacity 225L Inside dimension (WxDxH) 500 x 500 x 750 mm Temperature Range (without humidity control) -40°C to +150°C, accuracy and uniformity ±1.0°C Temperature Range (with humidity control) 20°C to +100°C, humidity 20%-98%RH, ±2.5%RH Test Space Load Bearing Capacity 10 kg or higher, uniformly distributed load (UDL) Heat Load 1000W Inner Chamber Construction AISI-304 stainless steel, mirror finish Shelf Arrangement Two adjustable stainless steel shelving channels with adequate load bearing capacity Plenum Area Dedicated plenum section accommodating blower, heaters, evaporator and dehumidification system Entry Ports 1 No. LHS Ø100 mm and 1 No. RHS Ø50 mm insulated cable entry ports Port Construction Non-conductive silicone ports with removable silicone plugs Exterior Construction Minimum 14-gauge galvanized steel Door Construction Full access hinged insulated door with pull-action latch lock Door Features Limit switch and anti-condensation heaters Insulation High-density mineral wool insulation, up to 48 kg/m3, asbestos-free
English 
